Check out these catches:
ADDITIONAL INFORMATION
Gannet X For DJI Phantom 3 & 4
Electronic Release
Button to deploy
Activated by the front LED lights of your drone, which can easily be turned on and off using your C1 or C2 buttons on your drone's remote
No tools
The Gannet X mounts in seconds to your drone with no tools required at all and there is no need for removal of the LED lens or modification of your drone
Rechargable Battery
The Gannet X is fully autonomous and self-sufficient with its own rechargeable & replacable battery, charged from an internal charger powered by USB charge lead in under 30min.
A single charge can do over 100 drops.
Distance and Control
Distanace
Because the Gannet X works with your drone's lights, the only limit to how far the release will work is determined by the drone itself.
Full activation
The Gannet X is activated by the front LED lights of your drone which can easily be turned on and off using your C1 or C2 buttons on your drone's remote . All 4 flight LED lights remain fully functional and visible. Alternatively, you can set your drone's camera that when you start recording that it automatically switches the lights off, stop the record and the lights are back on.
Safe and Secure
The Gannet X has a selectable half lock (safe) or full lock for the guys that fly amongst the gulls, adding protection against reel jams with emergency bail.
Sensor Interference
The Gannet X has been designed not to interfere with your drone's VPS sensors. All remain on, unobstructed, and active, no need to move it to the back legs to clear the sensors.
Landing
The Gannet X Allows you to land unobstructed unlike other cheaper competitors.
Balance
Our release is centrally located, like all other Gannet releases - balancing the load on all 4 motors. This is fundamental to your drones performance.
Gannet X
Your Satisfaction Is Our Priority
Customer Feedback
Gary E.
I currently own the Gannet release for my Mavic Pro and the new Gannet Sport for my P3P. I can not say enought good things about the products or the people that stand behind their products. Gannet customer service is second to none if you should have an issue. Buy with confidence and fish with confidence. May your baits fall with ease and your lines stretch in the seas!!!! Gary-Texas, USA
Tom C.
I just paid a visit to the Gannet shop here in Cape Town South Africa. Great talking to them, very knowledgeable and very helpful showing me the proper way to set up my bait release and evade seagull attacks! You might also get a tip on the do’s and don’ts (mostly don’ts) of squirrel harassment! If you have a chance come visit or drop them an email. They are awesome!
Colt C.
I want to say a big thank you to Gannet and Jacques, not only are your products of high quality and standards but your service you offer your customers are exceptional, it is clear you are not just about selling products but customer satisfaction is top priority. Your business will thrive for a very very long time.
James E.
Dropping bait in the zone while standing on a beach,with ya rod in the holder,and you watching the screen is awesome!
Frank K.
Buying gannet you dont just buy the best product but also get the best after sale support too. Any problem and they go that extra 100 miles to help and assist.thanks alot
Richard D.
They have a quality product and support. I have bought 2 Gannets for the DJI Phantom 3 Drone. Now that they have free shipping, I may buy one more as a spare!
Kev M.
Great product, so easy to fit
Miles D.
Of all the fishing gear I’ve bought online, Gannet is easily the best. Had my bait release here in Oz in under a week all the way from South Africa. Fitting it was all done in under two minutes and even got a clip to keep the rear end of my Mavic off the ground. Can’t wait to start dropping baits. Thanks guys, really appreciate the product and customer service.
Have a Question? We Have Answers
You Might Also Like
Product Details
Gannet X - DJI Phantom 3 & 4 drone fishing payload - bait release system
Main features:
- Fits all Phantom 3’s & 4’s
- Designed not to interfere with your drones VPS sensors. All remain ON, unobstructed and active, no need to move it to the back legs to clear the sensors.
- Mounts in seconds to your drone with no tools required, no removal of the LEDs lens,
- Clear from the drone camera including the large P4Pro & Adv camera.
- Over 10kg release ability - A Phantom can lift 1.4kg Max, 800g Max recommended bait, more possible but not recommended.
- Selectable auto mechanical release or full lock - for the guys that fly amongst the gulls, adding protection against reel jams with emergency bail.
- Is fully autonomous and self-sufficient with its own rechargeable battery, charged from an internal charger powered by USB charge lead in under 30min. A single charge can do over 100 drops, Over 2-week stand by if left on (warning this could damage the battery)
- No need to modify your drone in any manner nor do you need to open it,
- Central loading the same as all other Gannets - balancing the load on all 4 motors, this is fundamental to all drones. See WARNING section below for more details.
- All electronics are kept away from the light-bridge antennas and compasses that are located in all 4 the drones legs. Thus ensuring interference-free operation of your drone even at long distances,
- Is activated by the front LED lights of your drone which can easily be turned on and off using your C1 or C2 buttons on your drone's remote * . Alternatively, you can set your drone's camera that when you start recording that it automatically switches the lights off, stop the record and the lights are back on.
- Fastest one handloading of all releases, even while the drone is hovering. With no need for metal/plastic rings on the Drop-Loop. Designed for 0,25mm to 1,2mm nylon Drop-Loops.
- Instant activation from the C1 or C2 button on the drone remote, - full distance range of the drone.
- All 4 flight LED lights remain fully functional and visible (No LED is blocked off), Gannet X can be used in Light or Dark mode (user selectable)
- Smallest, most compact and most powerful Gannet to date and the smallest release in the market by a very large margin. Weighing in at only 55g. Weight saved on the release is safety gained for the flight reducing drone power consumption.
- High-quality injection moulded body with brass release pin. Design and appearance matching that of DJI themselves.
* excludes Phantom 3 Standard that does not have C1/2 buttons and needs activation from within the DJI Go App
WARNINGS & CONCERNS REGARDING OTHER DESIGNS
- DO NOT disable VPS or Landing Protection, critical systems that protect your drone, camera & gimbal as well as personal and public safety. Other designs that require VPS to be disabled are compromised and should be avoided. For more on VPS and flying over water please see https://youtu.be/FihnvkaN83M
- Some designs require yanking the line free, the drone IMU does not handle repeated sudden movements well, nor is it good for the drone legs that house the radio antennas and compasses.
- Some designs force off-centre loading, to any side, especially the back in order to clear the VPS sensors, this reduces the load-carrying ability by up to 40% if central back and up to 60% if off-centre to back, this dramatically increases drone instability, as individual motors over speed while countering the imbalance resulting in loss of control. These designs that require off centre loading are compromised and should be avoided as having one or two motors overwork and failover water is fatal. These designs make several claims to try to justify loading off centre, these claims are false and designed merely to justify a poor concept.
- There are designs that lift “near” the centre but when they do they interfere with the VPS, these designs have options to clear the sensors but in those positions, they then lift the load totally wrong.
- Several designs weigh over 100g, any unnecessary weight added to the release is unnecessary power-sapping on the drone, also reducing the max bait load by the equivalent. Every 50g saps approximately 5% more power from the battery 100% of the time the drone is airborne. So in 4 bait drops the drone has lost near 1:30min flight time just because of the heavy release. This can be the difference of making it back to shore or having the drone go for a swim.
- When using a downrigger clip: The addition of the downrigger clip requires VPS to be disabled - Gannet takes no responsibility for any losses that may be sustained as a result of disabling VPS. Gannet also does not recommend using this method (downrigger clip) for everyday use, yanking the line free, puts unnecessary stress and shock on the drone legs, which houses the radio antennas and compasses and may also negatively affect the drone’s very sensitive IMU.
What's in the box?
- Gannet X (CARBON BLACK)
- Phantom 3 sensor adapter.
- Phantom 4 sensor adapter
- USB Charge lead.
- 2 off additional spare body securing bands.
- 1 off Phantom 3 sensor mounting band.
- Instruction leaflet.